spec no: dsad0153 rev no: v.4 date: mar/23/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. kpsc03 - 107 super bright yello w description the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode . surface mount display features 0.3 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package : 1100pcs / reel.
spec no: dsad0153 rev no: v.4 date: mar/23/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu selection guid e part no. dice lens type iv (ucd) @ 10ma min. typ. kpsc03 - 107 super bright yellow (ingaaip) white diffused 8000 35400 common cathode, rt. hand decimal. description electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 20 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 175 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsad0153 rev no: v.4 date: mar/23/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu super bright yellow kpsc03 - 107
spec no: dsad0153 rev no: v.4 date: mar/23/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm ) recommended soldering pattern (units : mm ) kpsc03 - 107 smt reflow soldering instruction s number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process.
|
